What Causes The Nylon Waterproof Joint To Leak And Conduct Electricity

What causes the leakage and conduction of nylon waterproof joints:

Nylon waterproof joints can now be applied to water environments to provide reliable and safe joints for connectors. To date, nylon cable joints are widely used in life and work. If nylon cable joints are found to be leaking and conducting, what is usually the reason?
1. Poor insulation of nylon waterproof joints
In fact, the insulation effect of nylon cable joints is still relatively good. If the insulation effect is relatively good, the insulator must have good electrical function, mechanical function and technical molding function. Especially with the widespread application of miniaturized waterproof joints, the requirements for the useful insulating wall of insulators are getting thinner and thinner. If the wall is still very thick, it may affect the insulation effect.

2. Poor contact of Nylon Cable Gland
There is a metal conductor in the nylon cable joint, whose main function is to transmit power signals to other components, so the metal conductor has better conductivity. If the planning and production of the contact chamber are unreasonable, or the data is not up to standard when selecting, or the electroplating layer is improperly processed, it will affect the poor feel of the waterproof joint.

3. Poor fixation of nylon waterproof connector
In the case of poor fixation, it is usually due to imperfect equipment, or too many times of use of the product, which will lead to poor fixation, or improper selection of molding process when selecting materials, and some technical problems will cause poor fixation.
These may be the reasons why nylon cable connectors often leak and conduct electricity. Once there is leakage, conduction during use must be handled in time.
What does nylon waterproof connector M16 mean?
The wire range of nylon waterproof connector M16*1.5 is: 4-8 mm and 6-10 mm. If the outer diameter of your cable is 16 mm, you can choose the M25*1.5 specification or PG21 German thread.